SUBJECT:

What type of Ethernet cable do I use to connect my end device to the Wireless Bridge?

QUESTION:

What type of Ethernet cable do I use to connect my end device (e.g. Hub) to the Wireless Bridge (NWH6110)?

ANSWER:

The type of Ethernet cable depends on what type of device you're connecting to. The Ethernet port on the Wireless Bridge is not internally crossed, so please use the same guidelines you would with any other end device:
- Straight-through cable to a Hub or Switch.
- Crossover cable to another end device.

For example:
PC --> [Crossover Cable] --> Wireless Bridge

Hub --> [Straight-through Cable] --> Wireless Bridge